SWR Power meter RF bridge board HF VHF - 30-300 Mhz up to 1000W LDMOS TUBE

Description

SWR and Power assembled bridge. Can be used for BI-Polar, LDMOS or TUBE amplifiers up to maximum 1000W !
Features :
* Balanced/Symmetric type bridge
*
Direct
RF
output
power measurement
up to max 1000 W.
*
Have "shield area" - if needed, to be shielded or mounted in box (shield box).
* Bridge board don`t have sockets , because user can make it in shield box and outputs can be done via "feed through capacitors". Flexible for variable constructions.
* Self SWR of the bridge not exceed 1.03 at the highest frequency.
* Resistor places are free, so user can decide what dividers to use.
Compatible with this SWR and Power meter -->
CLICK HERE
Can be used for frequencies below 30 Mhz ( <30 Mhz), but it may require more than 20W at the input.
At 3 Mhz it may require more than 50W.
Can be used above 300 Mhz (max 480) but the power must be limited to 500W !!
For the most accurate measurement you must be sure that your load (antenna) is 50 Ohm.
Shipping service is registered . Tracking number will be provided.