RigExpert AA-600 advanced graphical antenna analyzer 0,1- 600MHz analyser AA600

Description

RigExpert AA-600
Antenna Analyzer (0.1 to 600 MHz)
with ability to display SMITH charts !
(US version displays only polar charts)
RigExpert AA-600 is powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.
Easy-to use measurement modes, as well as additional features such as connection to a personal computer make RigExpert AA-600 attractive for professionals and hobbyists.
AA-600 is available in non-US version (with ability to display Smith chart) and US version (displaying a polar chart instead).
The following tasks are easily accomplished by using these analyzers:
Rapid check-out of an antenna
Tuning an antenna to resonance
Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
Making coaxial lines or measuring their parameters
Cable testing and fault location
Measuring capacitance or inductance of reactive loads
You will receive:
1 x RIGEXPERT AA-600
1 x soft case
3 x AA rechargeable battery
1 x battery charger
1 x CD
1 x USB cable
1 x instruction manual in English
Specifications
Frequency range: 0.1 to 600 MHz - AA-600
Frequency entry: 1 kHz resolution
Measurement for 25, 50, 75 and 100-Ohm systems
SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
SWR display: numerical or easily-readable bar
R and X range: 0…10000, -10000…10000 in numerical mode, 0…1000, -1000…1000 in graph mode
Display modes:
SWR at single or multiple frequencies
SWR, return loss, R, X, Z, L, C at single frequency
SWR graph, 80 points
R, X graph, 80 points
Smith (or polar) chart, 80 points
TDR (Time Domain Reflectometer) graph
Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph modes.
RF output:
Connector type: N
Output signal shape: rectangular, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.
Output power: -10 dBm (at 50 Ohm load)
Power:
Three 1.5V, alcaline batteries, type AA *
Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA *
Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface:
320x240 color TFT displaty
6x3 keys on the water-proof keypad
Multilingual menus and help screens
USB connection to a personal computer
Dimensions: 23x10x5.5 cm (9x4x2”)
Operating temperature: 0…40 °C (32…104 °F)
Weight: 650g (23 Oz)
* Batteries are not included with the analyzer.