2.8" LCD Display Nano VNA HF VHF UHF UV Vector Network Analyzer Antenna +Battery

Description

Store
Feedback
Follow Us
New 2.8 inch LCD Display Nano VNA VNA HF VHF UHF UV Vector Network Analyzer Antenna Analyzer + Battery
PRODUCT DETAILS
- Condition: 100% brand new high quality
- Product Name: Vector Network Analyzer
- Color: Black
- Measurement frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
- RF output: -13dbm (maximum -9dbm)
- Frequency accuracy: <0.5ppm
- Measurement range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
- Port SWR: < 1.1
- Display: 2.8 inch TFT (320 x240)
- USB interface: USB type-C
- Communication mode: CDC (serial)
- Power: USB 5V 120mA, built-in 400mAh battery, maximum charging current 0.8A
- Number of calibration points: 101 (fixed)
- Number of scanning points: 101 (fixed)
- Display Tracking: 4, Marking: 4, Setting Save: 5
- PCB: 54mm x 85.5mm x 11mm/2.12" x 3.36" x 0.43" (without connectors, switches)
- Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart...
-----------------------------------------------
Description
-----------------------------------------------
* Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 900MHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-600MHz band provides better than 50dB of dynamics, and the 600M-900M band is better than 40dB of dynamics.
* This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 400mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring..
Note:
1. For photos, please allow slight color difference
2. Due to manual measurement, the size may be different
-----------------------------------------------
PACKAGE INCLUDES
-----------------------------------------------
1 x NanoVNA host (with 500mAh battery)
1 x USB Type-C data cable
2 x 30mm SMA male to male RG174 RF cable
1 x SMA simple calibration kit
1 x SMA female to female connector
About Our Shops And Products
Quality Assurance: We are committed to providing the best products for global buyers. Each product will be tested during purchase and storage.
Price concessions: Our products are provided directly by the factory and there is no intermediary agency. If you want to order in bulk, please contact us for wholesale price!
If the product you received is damaged or mistype, please do not leave any negative feedback first. Please contact us as soon as possible. We will solve it as soon as possible and find the best solution.
SHIPPING
We do ship out within 15 business days & You will be arrived it with 35-70 days.
Announcement
Shipping time may Delayed Or Changed According To The Pandemic Outbreak .We Will Try Our Best To Get The Order to You As Soon As Possible.
RETURN POLICY
We accept Return & Refund from every customers if not satisfied about our product
Note-
CUSTOMS RULES AND REGULATIONS ARE BEYOND OUR HAND AND IT IS BUYER RESPONSIBILITY TO CHECK ON THEM BEFORE THE ORDER !
PAYMENTS
We are accept payments only via PayPal because it is most secure method for both of buyers and sellers.
Choose us with confidence, so that you will not regret your choice !
JEFFRY STORE